Evaluasi Nilai Volume Produksi Overburden di PT Ansaf Inti Resources Site Berambai Bulan September 2022

Authors

  • Muhammad Havit Pratama Program Diploma 3 Teknologi Geomatika, Politeknik Pertanian Negeri Samarinda, Samarinda Author
  • Dawamul Arifin Program Studi Teknologi Rekayasa Geomatika dan Survei, Politeknik Pertanian Negeri Samarinda, Samarinda Author
  • Radik Khairil Insanu Program Studi Teknologi Rekayasa Geomatika dan Survei, Politeknik Pertanian Negeri Samarinda, Samarinda Author
  • Nia Kurniadin Program Studi Teknologi Rekayasa Geomatika dan Survei, Politeknik Pertanian Negeri Samarinda, Samarinda Author https://orcid.org/0000-0002-7748-378X

DOI:

https://doi.org/10.51967/gets.v2i1.30

Keywords:

pertambangan, surpac, overburden, volume overburden, data truckcount

Abstract

  1. Ansaf Inti Resources is located in Kec. Kutai Kartanegara, East Kalimantan. The coal mining process is preceded by excavation of overburden or activities carried out prior to coal getting to meet its production target, in determining the volume of overburden stripping in the Alam 4 pit survey activities are carried out and the determination of the rate of conveyance. In survey activities carried out by measuring the coordinates of X/easting, Y/northing and Z/elevation. The purpose of conducting research on, "Knowing the Value of Mine Production Volume based on Overburden Material Stripping survey data, truck count data Using Surpac Software" is to know the measurement of overburden progress survey in the mining area, know the calculation of overburden progress survey volume and find out the results of comparison of progress survey volume with calculations the number of trucks carrying overburden. The methodology used in this study consisted of the research preparation stage, the data collection stage, namely secondary data obtained indirectly from the survey team in the field. The results of measurements and calculations regarding the progress survey conducted in September 2022 obtained the overburden volume value in the first week of 76,289.77 BCM/m3, in the second week the overburden volume value was obtained 55,826.43 BCM/m3, in the third week the results were obtained the result of the overburden volume value is 44,179.01 BCM/m3, in the fourth week the result of the overburden volume value is 60,290.74 BCM/m3.

References

Anonim. (2017). lapisan tanah yang terdapat padapegunungan. Retrievedfrom://blog.lokerpalangka.net/2019/06/pengertian-engineering-tugas-dan.html

Hasvah, R. & Maiyudi, R., (2021). Perbandingan Volume Overburden Berdasarkan Data Survey dengan Data Truck Count pada Pit PT. Budi Gema Gembita Kabupaten Lahat,Sumatera Selatan. Jurnal Bina Tambang, Volume 6, pp. 97-106. Retrieved from https://tgs.dtr.ac.id

Inc, P., (2018). SURVEY REDUCTION SOFTWARE PROLINK™, United States of America: Sokkia Co. Ltd.

Pratama, D. E., (2017). ANALISIS DEVIASI VOLUME OVERBURDEN ANTARA METODE SURVEY DAN METODE TRUCK COUNT DI PT. ADARO INDONESIA HULU UTARA PROVINSI KALIMANTAN SELATAN.

Rasyidi, M. I. & Ansosry, (2021, April). Perbandingan Volume Overburden Menggunakan Metode Net volume Pada Pit Raja PT.Rajawali Internusa Jobsite Muara Lawai PT.Budi Gema Gumpita,Lahat Provinsi Sumatera Selatan. Jurnal Bina Tambang, Volume 6, pp.112-121.

Islamiah, D. & Triono, (2019). PERHITUNGAN KEMAJUAN TAMBANG ( PROGRESS MINING) DENGAN METODE NET VOLUME. Jurnal Geologi Pertambangan, Volume 2, pp,37-49. Retrieved from https://wlubumi.yut.ac.id.

Sobatnu, F., (2018). Survei Terrestris.Kota Banjarmasin

Agrawal, H., (2019). MODELING OF OPENCAST MINES USING SURPAC AND ITS OPTIMIZATION. National Institute of Technology, 9-12.

Downloads

Published

2023-09-29

How to Cite

Pratama, M. H., Arifin, D., Insanu, R. K., & Kurniadin, N. (2023). Evaluasi Nilai Volume Produksi Overburden di PT Ansaf Inti Resources Site Berambai Bulan September 2022. Journal of Geomatics Engineering, Technology, and Science, 2(1), 14-17. https://doi.org/10.51967/gets.v2i1.30

Similar Articles

1-10 of 25

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)

1 2 3 > >>