Perhitungan Jumlah Volume Tonase Batubara di PT Ansaf Inti Resources Kutai Kartanegara

Authors

  • Elok Aulia Noor Angelina Program S1 Teknik Geodesi, Institut Teknologi Nasional Malang, Kota Malang Author
  • Ahmad Aris Mundir Sutaji Program Studi Teknologi Geomatika, Politeknik Pertanian Negeri Samarinda, Kota Samarinda Author
  • A. Arifin Itsnani SM Program Studi Teknologi Geomatika, Politeknik Pertanian Negeri Samarinda, Kota Samarinda Author
  • Radik Khairil Insanu Program Studi Teknologi Rekayasa Geomatika dan Survei, Politeknik Pertanian Negeri Samarinda, Kota Samarinda Author

DOI:

https://doi.org/10.51967/gets.v3i2.48

Keywords:

cut, fill, gemcom surpac, grid, net volume

Abstract

The purpose of this research is to explain the method of calculating coal volume using Gemcom Surpac 6.3 software. This research also aims to present the amount of coal tonnage in comparison to volume calculations for the period of November 2022. Calculating coal volume is crucial in determining the quantity of mineral deposits. This volume calculation is done as accurately and precisely as possible to produce accurate volume and tonnage. The method used in this research is net volume calculation (grid/borrow pit), where the excavation volume is the difference between cut and fill during a specific period. The data used in this research is secondary data. The results of this research are in the form of coal volume calculation and coal tonnage for one month of excavation in November 2022 using Gemcom Surpac software with the net volume method. From the calculation results, the coal volume is 139,309.26 tons, with each seam M being 66,116.02 tons, seam Q1 being 33,563.89 tons, and seam Q3 being 39,629.35 tons. For the density of newly excavated coal seams, it is 1.00, so it can be said that whatever the calculated coal volume using Gemcom Surpac software is the result of the tonnage itself. The result of coal volume calculation also has a standard deviation value of 1.96%. The calculation result does not exceed the standard deviation set by PT Ansaf Inti Resources, which is ≤ 3%  

References

REFERENSI

Amanda, G. S. (2022, Agustus). Perhitungan Volume Overburden Menggunakan Software Surpac Di P.T. Ansaf Inti Resources Desa Berambai Kabupaten Kutai Kartanegara Kalimantan Timur. (T. Geomatika, Penyunt.) Karya Ilmiah Politeknik Pertanian Negeri Samarinda.

Ardzilla, Z. D. N. (2022). Deteksi kerusakan pasca gempa bumi di kabupaten mamuju tanggal 14 -15 januari 2021 menggunakan citra sentinel-1. Politeknik Pertanian Negeri Samarinda.

Arif, I. (2014). Batubara Indonesia. (A. Lestari, & Suprianto, Penyunt.) Jakarta, DKI Jakarta, Indonesia: PT Gramedia Pustaka Utama.

Arifin, D., Kurniadin, N., & Stefano, A. (2019). Petunjuk Praktikum Survei Tambang. Samarinda, Kalimantan Timur, Indonesia: Politeknik Pertanian Negeri Samarinda.

Buana, S., Nurhakim., & Hakim, R. N. (2020). Perhitungan Sumberdaya Batubara Menggunakan Metode Polygon Dan Metode Isoline Pada Wilayah IUP P.T. Usaha Baratama Jesindo. Jurnal Himasapta, Vol. 5, No. 1.

Lama, A. R,. Sai. S. S,. Mabrur, A. Y. (2019). Analisis Ketelitian Perhitungan Volume Galian Menggunakan Data Gridding Dan Tanpa Gridding Pada Pekerjaan Bendungan. Program Studi Teknik Geodesi Fakultas Teknik Institut Teknologi Nasional Malang.

Nainggolan, C. M. (2015). Perhitungan Volume Sumberdaya Batubara Dengan Cross and Section. Jurnal Universitas Gaja Mada.

Prasetya, J. R. (2022, Agustus). Analisis Coal Recovery Menggunakan Metode Perbandingan Data Survei Dengan Aktual Batu Bara Tertambang Di Pit Mahakam Tani Bakti Selatan. (T. Geomatika Penyunt.) Karya Ilmiah Politeknik Pertanian Negeri Samarinda.

Rassarandi, F. D., Sai, S. S., & Purwanto, H. (2015, Agustus 15). Analisis Ketelitian Perhitungan Tonase Stockpile Batubara Hasil Pengukuran Metode RTK. Jurnal Intergrasi, 7(No 2), 125.

Riansyah. (2022, Agustus). Perhitungan Tonase Stockpile Batubara Metode Cut And Fill Menggunakan Aplikasi MineScape. (T. Geomatika Penyunt.) Karya Ilmiah Politeknik Pertanian Negeri Samarinda.

Sari, A. S., Basuki, M., & Iriawan, S. A. (2017). Pemodelan Perhitungan Cadangan Batubara Dengan Perangkat Lunak Pada P.T. Mitra Abadi Mahakam Provinsi Kalimantan Selatan. Journal of Information Technology, Vol 2, No 2, 11-20.

Surfer Surface Mapping Software Tutorial. Studio Perencanaan Dan Permodelan Tambang Program Studi Teknik Pertambangan Universitas Lambung Mangkurat Banjarbaru 2007.

Tri, W. D., Kunia, S. D., & Jasmania. (2018). Batubara Pada Suatu Pit Studi Kasus: Kecamatan Pengaron, Kabupaten Banjar. C. Available at: http//eprints.itn.ac.id/1595/2/Danu Tri Wuryadi_1725915pdf.pdf.

Downloads

Published

2025-06-30

Issue

Section

Articles

How to Cite

Angelina, E. A. N., Sutaji, A. A. M., Itsnani SM, A. A., & Insanu, R. K. (2025). Perhitungan Jumlah Volume Tonase Batubara di PT Ansaf Inti Resources Kutai Kartanegara. Journal of Geomatics Engineering, Technology, and Science, 3(2), 42-47. https://doi.org/10.51967/gets.v3i2.48